NATIONAL PLASTIC HEATER, SENSOR & CONTROL INC.

Industrial Process Heating, Temperature Sensing & Control Technology For Industry

Toll Free: 1-877-674-9744

Visit Our Online Store To Purchase Our High Temperature European Connectors, High Temp Heater Accessories, High Temperature Heater Hook-Up Wire & Cable and Miniature Cartridge Heaters as Well as Our Nextflex Formable/Bendable Tubular Heaters

Explosion Proof Drum Heaters | Explosion Resistant Drum Heaters

Hazardous Area Explosion Proof Drum Heaters with Explosion Proof Temperature Controller
Hazardous Area Explosion Proof Drum Heaters with Explosion Proof Temperature Controller

Hazardous Area Explosion Proof Drum Heaters - Product Description

Serious quality FM approved Hazardous Area Explosion Proof Drum Heaters are low-watt density electric mat heaters with explosion resistant temperature controllers for T3 and T4A environments. Providing an efficient means of freeze protection, viscosity control and melting of solids in Class I, Division 2 areas . Hazardous environments have special considerations in order to keep it safe such as auto-ignition points. No matter what needs to be heated, we have a solution that meets the rigorous criteria of a hazardous area.
  •   Exclusive hazardous-area approval
  •   Class I Division 2 Groups A*, B, C, and D Class II Division 2 Groups F and G
  •   Dual set-point NEMA 7 temperature controller connected to a high temperature limit indicator light
  •   Exceptional 8" (203mm) coverage area
  •   Superior durability and flexibility
  •   Moisture and chemical resistant
  •   Patented grounded heating element meets NEC 427.23
* only for drum heater without NEMA 7 temperature controller. Contact factory for more information.

Specifications-Hazardous Area Explosion Proof Drum Heaters:

  •   8" (203mm) wide band
  •   High-limit thermostat designed to keep heater below NEC article 500 T-rating
  •   Power density: 2.5 watts/in2 (.004 watts/mm2)
  •   Heating element is laminated between two layers of 23mil and two layers of 25mil fiberglass reinforced silicone rubber
  •   Nominal silicone rubber density of 26 oz/yd2 (881 grams/m2) per layer
  •   Attached adjustable dual set-point NEMA 7 temperature controller with power cord 6 feet (1.8) long. One set-point is set at a high temperature limit and connected to read indicator light.
  •   Blanket leads 6 feet (1.8m)long for NEMA 7 controller; 1 foot (0.3M) without controller
  •    Leads from blanket to controller are enclosed in a liquid tight conduit
  •   392oF (200oC) maximum exposure temperature on heating surface
  •    Hazardous Area Drum Heaters-Designed for use on metal drums
T Rating NEC Temperature Actual High Limit Thermostat
T3 392oF (200oC) 292oF (145oC)
T4A 248oF (120oC) 158oF (70oC)
For T3 rated environments
 
Gallon
(Liter) Size
Diameter in
(mm)
Total
Wattage
Length in
(mm)
Width in
(mm)
Part Number
120VAC 240VAC
30 (114) 18.6 (473) 1000 58.5 (1496) 8 (203) DHCX231000T3 DHCX231000T3
55 (208) 22.3 (565) 1300 70.0 (1778) 8 (203) DHCX151300T3 DHCX251300T3

For T4A rated environments
Gallon
(Liter) Size
Diameter in
(mm)
Total
Wattage
Length in
(mm)
Width in
(mm)
Part Number
120VAC 240VAC
30 (114) 18.6 (473) 1000
58.5
(1496)
8 (203) DHCX131000T4A DHCX231000T4A
55 (208) 22.3 (565) 1300
70.0
(1778)
8 (203) DHCX151300T4A DHCX251300T4A

 Hazardous Area Explosion Proof Drum Heaters (55 Gallon)-Applications
  • Gas Plants
  • Spray Booths  
  • Heating & Preheating
  • All Grades of Oil
  • Heat Transfer Systems
  • Pulp and Paper Mills
  • Other Applications Requiring Heat for Hazardous Materials

Hazardous Area Explosion Proof Silicone Rubber Drum and Pail Heaters: Specifications, Manuals, Technical Letters & Tips:

Hazardous Area Explosion Proof Silicone Rubber Drum and Pail Hazardous Area Explosion Proof  Silicone Rubber Drum and Pail

RFQ-Hazardous Area Explosion Proof Drum Heaters
Click to open request for quote form

How To Order Explosion Proof Hazardous Area Drum Heaters

1)    Specify 30 or 55 Gallon Explosion Proof Hazardous Area Drum Heater
2)    Specify Watts and Volts
3)    Specify T Rating - T3 or T4A. See Chart above for ratings
4)    Specify part number from charts above
5)    Provide specific heat of material being heated
6)    Specify material being heated
7)    Specify number of units required
8)    Specify type of application and its parameters

We Ship Our Kapton & Process Heaters To OEM’s & Industry World Wide

Inquiries & Technical Support

Telephone : 905-859-8225 Facsimile: 905-859-4691

sales@nphheaters.com

Toll Free : 1-877-674-9744

Loading...
×